General |
Device Type | Router |
Enclosure Type | N/A |
Network Features | Access Control List (ACL) support, Broadcast Storm Control, MAC address filtering, NAT support, Quality of Service (QoS), Stateful Packet Inspection (SPI), VLAN support, Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, auto-uplink (auto MDI/MDI-X), content filtering, power over Ethernet (PoE), Class-Based Weighted Fair Queuing (CBWFQ), DHCP server, DiffServ support, IGMP snooping, IPv6 support, Intrusion Prevention System (IPS), Link Fragmentation and Interleaving (LFI), Low-latency queuing (LLQ) |
Security Features | SSL VPN for secure remote access Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256 Public-key-infrastructure (PKI) support 20 IPsec tunnels Cisco Easy VPN Client and Server NAT transparencyZone-based policy firewall: Stateful inspection transparent firewall Advanced application inspection and control Secure HTTP (HTTPS), FTP, and Telnet authentication proxy Dynamic and static port security |
QoS Features | Low-Latency Queuing (LLQ) Weighted Fair Queuing (WFQ) Class-Based WFQ (CBWFQ) Class-Based Traffic Shaping (CBTS) (on Fast Ethernet WAN ports and DSL ports in Packet Transport Mode [PTM] only) Class-Based Traffic Policing (CBTP) Policy-Based Routing (PBR) Class-Based QoS MIB Class of service (CoS)-to-differentiated services code point (DSCP) mapping |
Management & Monitoring | Cisco Configuration Professional Cisco Configuration Express Cisco Configuration Engine support Cisco AutoInstall IP service-level agreement (SLA) Cisco IOS Embedded Event Manager (EEM) CiscoWorks Cisco Security Manager Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, CLI, and HTTP management RADIUS and TACACS+ Out-of-band management with ISDN S/T port or external modem through virtual auxiliary port Cisco WCS for management of unified access points in models supporting WLAN |
Routing Protocols | BGP , EIGRP , GRE , HSRP , NHRP , OSPF , RIP-1 , RIP-2 , VRRP |
First Hop Redundancy | Virtual Router Redundancy Protocol (VRRP) (RFC 2338) Hot Standby Router Protocol (HSRP) Multigroup HSRP (MHSRP) Dial backup with external modem through virtual auxiliary port Dial backup with ISDN S/T port (select DSL models only) 3G backup (3G models only) |
Flash Memory | 128 MB |
Performance | N/A |
Ports | 1,4,Ethernet 10Base-T/100Base-TX, ISDN BRI ST, SHDSL, console , 4 pin USB Type A, RJ-45 |
Processor | N/A |
RAM | 768 MB(Max. Support Size) |
Status Indicators | LED indicators |
|
Dimensions & Weight |
Depth | 9.8 in |
Height | 1.7 in |
Width | 12.8 in |
Weight | 2.5 kg |
|
Environmental Parameters |
Humidity Range Operating | 10 to 85% relative humidity (noncondensing) |
Humidity Range Storage | 5 to 95% relative humidity (noncondensing) |
Operating Temperature | 32 to 77�F (0 to 25�C) |
Storage Temperature | -4 to 149�F (-20 to 65�C) |
|
Expansion / Connectivity |
Expansion Slots | 1-ExpressCard, SO-DIMM 200-pin |
Interfaces | 1,4 Ethernet 10Base-T/100Base-TX, ISDN BRI ST, SHDSL, console |
Manufacturer Warranty | Limited warranty |
|
Miscellaneous |
Safety/Compliant Standards | IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013, EN60950-1:2006 + A1:2010 + A11:2009 + A12:2011 + A2:2013 ITE equipment, UL 60950-1+ AMD 1 AMD 2 ITE equipment, EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B, 47 CFR Part 15, EN 300 386 v1.6.1, EN 301 489-1, EN 301 489-7, EN 301 489-24, EN 301 511, EN 301 908-1, EN 301 908-2, 47 CFR PART 22, 47 CFR PART 24 |
MTBF | N/A |
|
Power |
Features | External AC power supply |
Power Device | External |
Power Redundancy | N/A |
Voltage Required | AC 120/230 V |
|
Software / System Requirements |
Software Included | Cisco IOS Advanced Security |
No comments:
Post a Comment