NETGEAR FS116P Fast Ethernet Unmanaged Switch
SPECIFICATION
General | |
Device Type | SWITCH - 16 PORTS - L2 -UNMANAGED |
Enclosure Type | wall mount |
Compliant Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3x Full-duplex Flow Contro |
Network Features | Half-duplex, Wired, Auto-sensing per device , Full duplex capability |
MAC Address Table Size | 8K |
Stacking | Standalone Switch |
Performance | 10/100Mbps auto speed-sensing UTP ports |
Power Over Ethernet (PoE) | POE |
PoE Budget | 70 W |
Ports | 16 |
Status Indicators | Power, Link and activity indicators built into each, RJ-45 port |
Dimensions & Weight | |
Depth | 1.1 inch |
Height | 11.3 inch |
Width | 4 inch |
Weight | 0.83 kg |
Environmental Parameters | |
Humidity Range Operating | 90% maximum relative humidity, non-condensing |
Humidity Range Storage | 95% maximum relative humidity, non-condensing |
Max Operating Temperature | 104°F |
Max Storage Temperature | 158°F |
Min Operating Temperature | 32°F |
Min Storage Temperature | 14°F |
Expansion / Connectivity | |
Interfaces | 16 x RJ-45 |
Manufacturer Warranty | ProSAFE Lifetime Warranty |
Miscellaneous | |
Safety/Compliant Standards | CB mark, commercial IEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL/cUL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, AN/NZS 60950.1:2015, Russia EAC mark |
MTBF | 546,673 Hours |
Power | |
Features | External power adapter |
Power Device | External Redundant power supply |
Voltage Required | Auto-sensing 100 to 240V, 50/60Hz |
Software / System Requirements | |
Software Included | NETGEAR PROSAFE |
Nice Blog Post thanks for sharing it.
ReplyDeleteNetgear Customer Support Number Australia
how to setup a Netgear router
Netgear nighthawk australia