Buy NETGEAR XS728T 10-Gigabit ProSAFE Smart Managed Switch

                                                                 

       

SPECIFICATION

General
Device Type	switch 28 ports - managed
Enclosure Type	RACK MOUNTABLE
Authentication Method	IEEE 802.1x RADIUS port access authentication
VLAN	512 VLAN IDs
Network Features	IEEE 802.1Q VLAN tagging, IP-based VLANs, MAC-based VLANs, Auto-VoIP VLAN / Auto-Voice VLAN, Auto-VoIP, Voice VLAN, Auto-Video VLAN, Private VLAN, LINK AGGREGATION, IEEE 802.3x Full-Duplex Flow Control
Security Features	Robust security, 802.1x authentication (EAP), Port-based security by locked MAC, ACL ltering to permit or deny tra c based onMAC and IP addresses
QoS Features	Comprehensive QoS features, Port-based or 802.1p-based prioritization, Layer 3-based (DSCP) prioritization, Port-based ingress and egress rate limiting, Weighted Round Robin (WRR), Strict priority queue technology
Management & Monitoring	Web Browser-based GUI (HTTP/HTTPS),PC-Based Smart Control Center Utility (SCC), RMON, SNMP
Routing Protocols	IPv4 & IPv6 Static Routing
Flash Memory	256MB NAND Flash
Jumbo Frame Support	9 K
MAC Address Table Size	16K
Stacking	standalone Switch
Performance	560Gbps, 416.6 Mpps
Power Over Ethernet (PoE)	N/A
PoE Budget	N/A
Ports	28
Processor	800 MHz Dual Core
RAM	512MB
Status Indicators	Speed, Link, Activity, Power and Fan
Dimensions & Weight
Depth	12.2 inch
Height	1.7 inch
Width	17.3 inch
Weight	5.04 kg
Environmental Parameters
Humidity Range Operating	90% maximum relative humidity, non-condensing
Humidity Range Storage	95% maximum relative humidity, non-condensing
Max Operating Temperature	122°F
Max Storage Temperature	158°F
Min Operating Temperature	32°F
Min Storage Temperature	– 4°F
Expansion / Connectivity
Manufacturer Warranty	ProSAFE Lifetime Warranty
Miscellaneous
Safety/Compliant Standards	CE mark, commercial, FCC Part 15 Class A, VCCI Class A, Class A EN 55022 (CISPR 22) Class A, Class A C-Tick, EN 55024, CCC, 47 CFR FCC Part 15, SubpartB, Class A, ICES-003: 2016 Issue 6, Class A, ANSI C63.4:2014, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AN/NZS CISPR 22:2009+A1:2010 CLASS A, CB mark, commercial, CSA certi ed (CSA 22.2 #950), UL listed (UL 1950)/cUL IEC 950/EN 60950, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AN/NZS 60950.1:2015,
MTBF	514,977 hours
Power
Features	Internal power supply
Power Device	internal Redundant power supply
Power Redundancy	1 POWER SUPPLY
Voltage Required	AC 120/230 V
Software / System Requirements
Software Included	DUAL FIRMWARE IMAGE