Buy Netgear FS728TLP ProSAFE Fast Ethernet Smart Managed Switch

SPECIFICATION

General
Device Type	SWITCH 24 - PORTS - MANAGED
Enclosure Type	RACK MOUNTABLE
VLAN	128 VLAN IDs
Network Features	Jumbo frame support, Cable diagnostics, Loop detection, Energy Efficient Ethernet (IEEE 802.3az) compliant, Link Aggregation
Security Features	Broadcast, multicast, unknown unicast storm control,DoS attacks prevention
QoS Features	Weighted Round Robin (WRR) priority queuing, Port-based rate limiting (ingress and egress), Port-based QoS, IEEE 802.1p COS, IPv4 DSCP, IPv4 ToS
Management & Monitoring	Web browser-based management GUI, Smart Control Center Software for multi-switch management, IP Access List, IPv6 Management, Configurable Management VLAN, SNMP v1/v2c and v3, Standard MIBs (RFC1213, RFC1643, and RFC1493), RMON group 1, 2, 3, 9,Firmware Upgrade through Smart Control Center (TFTP), Firmware download (to switch) and upload (to server) through TFTP/HTTP, Configuration and Image Upload (to PC) through HTTP,Configuration Download (to Switch) thru TFTP/HTTP and upload (to server),Memory & FLASH log,Syslog (server)
MAC Address Table Size	8k
Power Over Ethernet (PoE)	POE+
PoE Budget	100 W
Ports	28
Status Indicators	Speed, link, activity, Power, Fan and PoE Power Status
Dimensions & Weight
Depth	8.1 inch
Height	1.7 inch
Width	17.32 inch
Weight	2.92 kg
Environmental Parameters
Humidity Range Operating	90% maximum relative humidity (RH), non-condensing
Humidity Range Storage	95% maximum relative humidity (RH), non-condensing
Max Operating Temperature	122°F
Max Storage Temperature	158°F
Min Operating Temperature	32°F
Min Storage Temperature	– 4°F
Expansion / Connectivity
Manufacturer Warranty	NETGEAR Lifetime Limited Warranty
Miscellaneous
Safety/Compliant Standards	CE mark, commercial, FCC Part 15 Class A, VCCI Class A, Class A EN 55022 (CISPR 22) Class A, Class A C-Tick, EN 50082-1, EN 55024, CE mark, commercial, CSA certi ed (CSA 22.2 #950), UL listed (UL 1950)/cUL IEC 950/EN 60950
Power
Features	Internal power supply
Power Device	internal Redundant power supply
Voltage Required	AC 120/230 V