| General |
| Device Type | SWITCH - 8 PORTS - L2 -UNMANAGED |
| Enclosure Type | wall mount |
| Compliant Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3x Full-duplex Flow Contro |
| Network Features | Half-duplex, Wired, Auto-sensing per device , Full duplex capability |
| MAC Address Table Size | 1K |
| Stacking | Standalone Switch |
| Performance | 10/100Mbps auto speed-sensing UTP ports |
| Power Over Ethernet (PoE) | POE |
| PoE Budget | 53 W |
| Ports | 8 |
| Status Indicators | Power, Link and activity indicators built into each, RJ-45 port |
|
| Dimensions & Weight |
| Depth | 9.3 inch |
| Height | 6.2 inch |
| Width | 4.1 inch |
| Weight | 0.26 kg |
|
| Environmental Parameters |
| Humidity Range Operating | 90% maximum relative humidity, non-condensing |
| Humidity Range Storage | 95% maximum relative humidity, non-condensing |
| Max Operating Temperature | 104°F |
| Max Storage Temperature | 158°F |
| Min Operating Temperature | 32°F |
| Min Storage Temperature | -40°F |
|
| Expansion / Connectivity |
| Interfaces | 8 x RJ-45 |
| Manufacturer Warranty | ProSAFE Lifetime Warranty |
|
| Miscellaneous |
| Safety/Compliant Standards | CB mark, commercial IEC 60950-1:2005(ed.2) + A1:2009 + A2:2013, UL/cUL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, AN/NZS 60950.1:2015, Russia EAC mark |
| MTBF | 927000 Hours |
|
| Power |
| Features | External power adapter |
| Power Device | External Redundant power supply |
| Voltage Required | Auto-sensing 100 to 240V, 50/60Hz |
|
| Software / System Requirements |
| Software Included | NETGEAR PROSAFE |
A very interesting article. The insights are really helpful and informative. Thanks for posting. Visit here for more info.
ReplyDeleteNetgear Support
netgear does traffic meter need a restart
Netgear Support Australia
How to connect Netgear router
Looking how to reinstall firmware on netgear router, visit on Check this Blog